FILLING SCRAPER CONVEYOR
PRODUCT INTRODUCTION
The suspended solid filling scraper conveyor is particularly important for mines mining in the "three down" coal seams. By replacing the security coal pillars left in the original working face with solid filling, it not only maximizes the recovery rate of coal resources, prolongs the service life of the mine, reduces the complex lifting process and environmental pollution caused by stones, but also avoids the problem of ground subsidence and collapse.
TECHNICAL FEATURES
This scraper conveyor mainly consists of a head transmission part, a middle groove, a discharge groove, a telescopic tail, a scraper chain, etc. It has the following characteristics:
1. The bending performance of the entire machine is good. Vertical bending should not only meet the changes in the height of the working face, but also adapt to the height changes of the lowering and lifting of the hydraulic support when moving. Horizontal bending should meet the requirements of the pushing step distance when moving the hydraulic support.
2. The connection strength of the entire machine is high. The middle groove adopts the form of cast groove and wear-resistant medium plate assembly welding, and the groove is connected with forged dumbbells, meeting the strength requirements during frame movement, reducing maintenance costs, and improving service life.
3. The middle plate of the middle slot adopts an overlapping movable plug type, with two push cylinders on each side. The push cylinder controls the extraction and insertion of the movable plug plate to complete the filling of materials.
4. The scraper chain adopts a medium double or edge double structure, while the circular ring chain adopts a high-strength compact chain. The scraper is made of high-strength materials and undergoes a heat treatment process of overall tempering and quenching at both ends. Then, the two ends are welded with wear-resistant layers, ensuring the strength, stiffness and wear resistance of the scraper and improving its service life.
5. The tail is a telescopic tail, which adopts a compact hydraulic tensioning and mechanical locking type telescopic mechanism to facilitate the adjustment of chain pre-tension, ensuring that the chain is moderately tensioned and in good meshing with the sprocket, greatly reducing the occurrence of chain jumping and biting accidents, and effectively improving the service life of the sprocket and chain.
TECHNICAL SPECIFICATIONS & PARAMETERS
| Filling Scraper Conveyor |
Product
Model |
Conveying Capacity
(t/h) |
Design Length
(m) |
Motor Power
(kw) |
Chain Speed
(m/s) |
Chain Specification
(mm) |
Middle Groove Specifications
(length x width x height,
mm) |
| SGZ630/132 |
300 |
80 |
132 |
0. 86 |
φ22 X 86 |
1500 X 590 X 245 |
| SGZ630/160 |
350 |
80 |
160 |
1.04 |
φ22 X 86 |
1500 X 590 X 245 |
| SGZ730/160 |
400 |
80 |
160 |
1. 16 |
φ26 X 92 |
1500 X 690 X 260 |
| SGZ730/200 |
450 |
80 |
200 |
1. 16 |
φ26 X 92 |
1500 X 690 X 260 |
| SGZ730/250 |
500 |
80 |
250 |
1.24 |
φ30 X 108 |
1500 X 690 X 260 |
| SGZ764/200 |
450 |
80 |
200 |
1. 16 |
φ26 X 92 |
1500 X 724 X 260 |
| SGZ764/250 |
500 |
80 |
250 |
1.24 |
φ30 X 108 |
1500 X 724 X 260 |
| SGZ764/315 |
600 |
100 |
315 |
1.29 |
φ30 X 108 |
1500 X 724 X 260 |
| SGZ800/315 |
650 |
100 |
315 |
1.5 |
φ34 X 126 |
1500 X 800 X 300 |
| SGZ800/375 |
700 |
100 |
375 |
1.5 |
φ34 X 126 |
1500 X 800 X 300 |
| SGZ800/400 |
700 |
100 |
400 |
1.5 |
φ34 X 126 |
1500 X 800 X 300 |
SIMILAR PRODUCTS SUPPLY
COMPANY INTRODUCTION
- Established in 1955, Shandong Mining Machinery Group Co., Ltd. (the "Company" ) owns 21 holding companies including Shandong Mining Machinery Equipment Manufacturing Co., Ltd, and was listed on Shenzhen Stock Exchange (stock code: SZ002526) in December 17, 2010. By the end of 2022, the Company owns total assets of RMB 4.3 billion, floorage of more than 2,000 acres (approximately 133 hectares) and over 2,000 employees.
- As one of the key manufacturers of intelligent conveying systems (belt conveyor) in China, Shandong Mining Machinery Group Co., Ltd. is in the leading position in terms of scale, market share and product technical level. We have standardized and serialized various types of belt conveyors (with belt width range 600-2400), such as General series, DTII, DTI I (A) series, Overland Conveyor, Inclined Conveyor with Large Inclination Angle, Turning Conveyor, Bidirectional Conveyor, Pipe Conveyor, etc. The bulk conveyors now register total installed power of 8,000KW, conveying capacity of 11,500t/h, inclination from -28 to + 33 degree, belt width of 2,400mm, maximum speed of 6.3 m/s, and maximum conveying distance per unit of 12.6 km.
- The company has complete research and development, design, test, detection, and measurement capabilities, and has complete manufacturing capabilities for intelligent conveying equipment, such as casting, forging, heat treatment, electroplating, welding, machining, surface treatment, automatic spraying and assembly. It has qualifications for specialized contracting of foundation engineering and steel structure engineering, general contracting of electromechanical engineering construction, intelligent loT cloud platform, intelligent control system software VI.0 for bulk material conveying, and general contracting capability of EPC, BOT and BT operation and maintenance of intelligent bulk material conveying system engineering.
- The Technology R&D Center has more than 100 professional technicians and manages several research institutions, including the Overland Conveyor, Pipe Conveyor, General Conveyor, Intelligent Control, Intelligent Operations, Process Design, New Product R&D, Civil Steel Structure Engineering, etc. There are 8 professor engineers, 50 senior engineers, 20 mechanical engineers, 12 steel structure engineers, 11 automation engineers and 16 process engineers, among them, more than half of technicians have postgraduate degree.
- The Company has been certified for the 1509001:2015 standard quality management system, environmental management system, occupational health and safety management system, National "High-Tech Enterprise" and Shandong Coal Machinery Engineering Technology Research Center. It has been titled a National Excellent Enterprise in the Coal Machinery Industry, Double Top-10 Enterprise in the Coal Machinery Industry, AAA-grade Credit Enterprise of the China Coal Industry Association, and listed as a "China Potential Enterprise" by Forbes magazine for five consecutive years.
OUR FACTORY
COMPANY INTELLIGENT PRODUCTION & TESTING EQUIPMENT
COAL MINING MACHINERY & SPARE PARTS SUPPLY
CONVEYORS EPC/BOT CONTRACTING CAPABILITY
VARIOUS CONVEYOR SPARE PARTS SUPPLY
CERTIFICATES & HORNORS
BRANCHES & OFFICES
TEAM BUILDING
LONG-TERM STRATEGIC COOPEATORS
MAIN CUSTOMERS
CUSTOMERS VISITS
DOMESTIC & OVERSEAS EXHIBITIONS
SINGING CEREMONY
Audited Supplier 
){kind=link}